The
Challenger Pond Filter is a third generation bead filter
for ponds that sets the standard for all other pond filters. This
pond filter is truly top of the line and should be the
first choice for pond owners with larger ponds. When used in
conjunction with a properly sized UV sterilizer, these systems are guaranteed to
provide crystal-clear water in your pond. This durable pond filter
comes with a 10 year warranty and is also very user-friendly.
To learn more
about Challenger Filters - CLICK HERE
|
"After all
else failed to clear my pond your Challenger did the
job in two weeks. Easy to maintain & a quantum leap
above
everything else out there."
Fred
Racenstein
More
Testimonials
|
Hydara-Swirl Technology with Sludge Drains
|
Challenger
filters now incorporate Hydra-Swirl technology with sludge
drains. With the Hydra-Swirl addition, solids are spun to
the center of the chamber - where they wait for the operator to
open the sludge drain. With this unique feature, solids are
purged under pressure while opening the Sludge drain with the
pump running. This forces the heavier solids out of the
filter in a matter of a few seconds. A Multi-port Valve is
also provided as standard equipment with features such as
Backwash, Rinse, Recirculate, and Medical Bypass. |
Now available
in 5 sizes to meet your pond requirements.
|
|
|
|
Model
|
Size
of Pond |
| Challenger
#40
(1.75 cu. ft.) |
up
to 2500 gal |
| Challenger #50
(2.50 cu. ft.) |
up
to 5000 gal |
| Challenger #60
(4.25 cu. ft.) |
up
to 10,000 gal |
| Challenger #100
(6.00 cu. ft.) |
up
to 15,000 gal |
| Challenger #140
(9.00 cu. ft.) |
up
to 22,000 gal |
**
The optimum flow valve, accupressure
gauge, and bead agitator blower are standard equipment on all
Challenger Pond Filters...
|
Challenger 40
1.75 CU. FT. |
Challenger 50
2.5 CU. FT. |
Challenger 60
4.25 CU. FT. |
 |
|
|
For
Ponds up to
2000 Gallons |
For
Ponds up to
5000 Gallons |
For
Ponds up to
10,000 Gallons |
|
|
 |
 |
 |
BENEFITS AND FEATURES:
Sturdy
fiberglass construction rated at 50psi.
Available to
fit most any size pond.
Constructed
with minimal flow restriction in mind.
All plumbing
is 2 inch.
Easy
hydraulic backwash with no dirty discharge to the pond.
Now
available with a sludge removal feature on the bottom of the filter.
Small
footprint - Ideal for space limited situations.
Easy
installation.
500-550
cubic feet of surface area per square ft of media.
Hydra-thrust
Blower is included with every filter to assist with backwashing.
 Sludge
removal drain on the bottom of each Challenger assures full removal
of waste with each backwash.
The
New Hydra Swirl feature allows uniform distribution of flow and
debris throughout the filters bead pack.
A
High-Flow Multiport Valve is provided as standard equipment with features such
as Backwash, Rinse, Recirculate, and Medical Bypass.
|
