|
Dependable and easy to service,
the Challenger is Fluidart's®
best-selling filter.
This efficient bead filter is produced in five sizes to fit
ponds up to 20,000 gallons. Advantages include its tough
fiberglass tank, side-mounted multiport valve, and ease of
installation and maintenance. No need to disconnect
plumbing to access and service internal components. The
unique Hydra-Swirl design allows solids to be spun to the center
of the vessel where they stay until the sludge drain is opened.
Through the multiport valve, the pump delivers a thorough
backwash and rinse. With the drain open and the pump
running, solids are purged under pressure, fully removing waste
in a few seconds.
For backwash the Challenger
series
filters utilize Hydra-Thrust bead agitation, using forced
air to agitate the beads and free up trapped debris.
Other features:
-
Pressurized
filter
-
Designed
for minimal flow restriction
-
2"
plumbing throughout
-
500 - 550
square feet of surface area per square foot of media
-
Can be used
with or without a pre-filter
| Model |
Ft3 Media |
Ponds
up to |
Valve
Clearance |
Approx.
Weight |
Dimensions *(see
below) |
| A |
B |
C |
D |
| 40 |
1.75 |
2,500 |
13" |
116 |
34.75 |
21.5 |
11.875 |
36.75 |
| 50 |
2.5 |
5,000 |
13" |
150 |
34.75 |
21.5 |
11.875 |
36.75 |
| 60 |
4 |
10,000 |
13" |
220 |
35.50 |
24.5 |
13.625 |
37.50 |
| 100 |
6 |
15,000 |
13" |
325 |
39.75 |
30.5 |
16.25 |
41.75 |
| 140 |
9 |
20,000 |
13" |
470 |
45.25 |
36.5 |
18.75 |
47.25 |
Fluidart®
Challenger Filter Product Manual -
CLICK HERE |
