Site Map|
Weblog |
Articles
  
|
| |
Dynamo Pumps |
 |
For Ponds, Waterfalls, and Water
Features |
|
| The heart of every system is the
pump. These pumps are designed for ponds and offer the versatility of 2 speed
options. Generally, one would run the pump on the lower speed under normal
conditions, and use the higher speed for backwashing or just to increase water flow.
One year warranty.
|
 |
This is a
work horse of a pump designed for Koi pond and water features where
large amounts of water need to be moved but with a minimal electrical
usage.
It moves 4000 gallons per hour at a
7' head with a 22 ft. shutoff. Electrical usage is plate rated
at 3.8 amps with actual draw around 3.1 amps. All this equals a
very dependable energy efficient pump with an unbeatable three year
warranty. |
1/4 Horsepower
1 Speed PUMP |
|
|
|
|
Here
is a pump that's perfect for a pond up to 5000 gallons, running on low
speed at 2.6 amps means you're not using very much electricity but,
still flowing 2400 gallons per hour.
When you need it you have a
high speed of 5000 gallons per hour. This is really a great feature to
have in reserve, use high for backwashing of filters or kick it into
high to make your waterfall really roar! |
3/4 Horsepower
2 Speed PUMP |
|
$374.99 |
|
|
|
Handles a 6000 gallon
pond with no problem. 2.9 amps on low while pumping 3000 gallons per hour.
6000 gallons per hour on high. A good strong pump built to last and
like all Dynamo pumps comes complete with a basket strainer. |
1 Horsepower
2 Speed PUMP |
|
$399.99 |
|
|
PURE MUSCLE!! This pump means business. Built to last and
backed up by a 1 year warranty. 3500 gallons per hour on low at 4.4 amps and if you
really want to see the rapids on your waterfall, just kick this baby to high and watch
as7000 gallons per hour turns your waterfall into whitewater. |
1.5 Horsepower
2 Speed PUMP |
|
$434.99 |
|
| SPECIAL NOTE
- - When using any of these pumps with a bead filter, always use a higher
size / speed than normal because you will lose 25 - 40% of the flow rate from backpressure
in the filter system. |
Back
to Detailed Diagram |
Back to
External Pumps |
|
|
|
|
