Alpha1 Pond Filter Features:

High efficiency due to increased lateral flow surface area within the filter. This allows the use of smaller pumps to do the same pond turnover that normally would require a higher wattage or amperage pump to do the same job. (The energy savings with this filter would be significant. This filter was designed to provide the end consumer with the most economical filter to operate with the least amount of frustration.)

Higher flow Multiport valve, the least restrictive on the market. With 2" thread ports on all models, you are assured of maximum flow with this valve.

With the built in Vortex design all heavy solids are gently spun to the center of the filter where they sit waiting for the Alpha1 Purge valve to be opened. By opening this valve with the filter under pressure the accumulated heavy solids are purged out to waste in only a few seconds.

The Alpha1 Life Support System is the industry 1st. With the built in Alpha1 Life Support System you can use your koi pond air pump to supply much needed oxygen to the bead filter during medical treatment bypass or times of pump failure, etc.

Comes standard with the Alpha1 Bead Agitator System. Standard equipment on all models is the Agitator to break up the bead pack to give an efficient backwash to the filter which means the bead filter will go longer between backwashings.

The Alpha1 Pressure Gauge gives true readings of tank pressure unlike some that give false readings due to their mounting position on the filter.

A large union spring check valve is used that not only enables huge amount of flow from the Agitator to the beads, it is also easy to change the body of the valve in case of failure. With the double union design the body can be changed in second using no tools. Just unscrew the unions, replace the body, and you're done.

With rebuildable union ball valve being used on the purge drain, you never have to cut off a failed ball valve. Disassembles in second to clean or rebuild.

The Alpha1 filter carries a lifetime warranty (see bottom of page). This means that if at anytime you own the filter, the filter vessel fails, then you get a new filter at no cost.

Easy Access. Should you need access to the internals of this filter, simply remove the top dome and you're in. No need to remove any plumbing with the Alpha1 filter.

Click Here For Customer Reviews and Testimonials

Alpha1 1.75 CU. FT.
	The 1.75 is a big workhorse in a small package. The 1.75 cu. ft. model is rated for ponds up to 2500 gallons. This filter can handle fish loads of 87.5 lbs. Comes complete with all 2" threaded fittings for maximum flow and all the "Bells and Whistles" of the largerunits. Tank measures 19" X 30".
	For Ponds up to 2500 Gallons	Price $1175.00

Alpha1 2.5 CU. FT.
	The 2.50 is the perfect filter for ponds up to 5000 gallons and fish loads up to 125 lbs. Flow rated at 70 gpm for bio-mechanical filtration. 21" X 34.5" allows you to hide this unit anywhere. Everything is standard equipment. The perfect filter for the majority of ponds.
	For Ponds up to 5000 Gallons	Price $1335.00

Alpha1 4.25 CU. FT.
	This is the 4.25 unit. What a nice size filter. A 4.25 cu. ft. capacity designed to be used on ponds up to10,000 gallons with fish loads up to a whopping 225 lbs. (That's a lot of fish.) Easily flows 90 gpm while only having a footprint of 24" X 35.5". All the extras included
	For Ponds up to 10,000 Gallons	Price $1699.00

Alpha1 6.0 CU. FT.
	The 6.0 boasts 6 cu. ft. of media and a carrying capacity of 300 lbs of fish. Something for the serious koi keeper. The koi keeper with a pond up to 17,000 gallons with flows up to 120 gpm. All this in a package only 30" X 40". One awesome unit - an unbelievable value
	For Ponds up to 17,000 Gallons	Price $2099.00

Alpha1 9.0 CU. FT.
	This Behemoth will get the job done. An unbelievable 9 cu. ft. of beads in a size of only 36" X 45". Almost anyone can find a space of 36" to fit one of these monster koi keepers in. Use on ponds up to 25,000 gallons with flow rates up to 180 gpm.
	For Ponds up to 25,000 Gallons	Price $2700.00

The Medusa Filter by Aquabead
Runs of 2 pumps for a maximum flow Click Here For More Info	The Medusa solves the age old problem of how to filter a large pond while only using one filter. The problem: Pond is 20 to 25 thousand gallons. You want to turn it over about every 2 hours. A 1/4 hp pump will put out about 5000 gallons an hour. With this filter you can run two 1/4 hp or two 1/3 hp pumps and only pull about 5 amps total with the 1/4 hp pumps or 7.6 amps total with the two 1/3 hp pumps. This is truly the Ultimate Pond Filter.
	For Ponds up to 25,000 Gallons	Price $2997.00 Reg $3400

"I'm in Tucson Arizona and I bought a Medusa Aquabead Filter from you guys and I have to tell you we've got that thing hooked up and it's cleared the pond in 24 hours.

I am ASTOUNDED at how beautiful this thing is, it works perfectly, the pumps are UNBELIEVABLY QUIET, it takes up less space than my vortex cones that I had before and I'm EXTREMELY happy with this system.

I just wanted you to know. You probably don't get too many calls of praise, most people complain, but I have nothing but praise about this system. I'm TOTALLY AMAZED and I just wanted to thank you guys..."

Jean
Tucson, Arizona

Listen to Jean
Tell You in Her Own Words
Click the Audio Button Below!

Click Here For More Customer Testimonials